Setting Up Windows Nt 4.0 Clients For Wins (Smb) Printing - Kyocera Ci1000 Operating Instructions Manual

3

3-25 Setting up Windows NT 4.0 clients for WINS (SMB) printing

The printer you are browsing for is the SMB Name Server. If you do not know the
name of the SMB Name Server and SMB printing has been enabled on the
printer, refer to the printer's Configuration page for this information.
For instructions on printing a Configuration page, see "Printing pages from the
control panel" on page 2-18.
6. Under the printer's name, Select the queue you wish to print to and click OK.
7. In the Add Port dialog box, verify that the network path is correct and click OK.
8. To confirm the connection, click the General tab in the Properties dialog box.
9. Click Print Test Page and click OK.
If the test page prints successfully, you are ready to print from the computer.
Setting up Windows NT 4.0 clients for
WINS (SMB) printing
The following instructions describe printing to a network port using the Details
tab of the Printer Properties dialog.
The Details tab of the Printer Properties dialog is not available when the dialog is
accessed using File>Print from within applications. This tab appears only when
the Printer Properties dialog is accessed via the Printers folder.
T SMB
O SET UP PRINTING ON WINDOWS
1. From the Start menu, choose Settings, and click Printers.
2. Select the Ci1000 printer icon, and choose Properties from the File menu.
3. Click the Ports tab in the Properties window and click Add Port.
4. In the Printer Ports dialog box, select Local Port, and then click New Port.
The Port Name dialog box appears.
5. Enter the name of the printer port to print to, for example: \\Ci1000\direct and
then click OK.
NT 4.0: