Setting Up Fiery Webtools - Kyocera Ci1000 Operating Instructions Manual

3
3-22 Connecting the Printer to a Network

Setting up Fiery WebTools

Fiery WebTools allow you to manage your Ci1000 remotely from the Internet or
from your company's intranet. The Ci1000 has its own home page, from which
you are able to select from a variety of functions including Status,
Fiery WebSpooler, WebLink, Fiery WebDownloader, and Fiery WebSetup.
Before you can send jobs to the printer, you must use Fiery WebSetup
I :
MPORTANT
to complete the process of configuring Setup options, as described starting on
page 6-18. Therefore, you must complete the procedures described in this section
and in "Viewing and changing Setup from Fiery WebSetup" on page 6-18 before
you can send jobs to the printer.
For information on using Fiery WebTools (other than Fiery WebSetup), see
Drivers and Utilities.
In order for network users to access and use Fiery WebTools, you need to set
network communication options in Network Protocol Setup on the control panel.
You also need to prepare each user's workstation to communicate with the Ci1000
using Fiery WebTools over the Internet or intranet. Once the initial Setup has
been performed from the printer's front panel, you must complete the Setup
configuration from Fiery WebSetup.
T F W T C 1000:
O SET UP IERY EB OOLS ON THE I
In order for client workstations to access Fiery WebTools, they must use a Web
browser. The recommended browser versions are:
• Netscape Navigator 3.04 for Macintosh computers,
• Microsoft Internet Explorer 4.0.1 or Netscape Communicator 4.0.4 for
Windows computers.
Microsoft Internet Explorer 3.x does not support the Fiery
N :
OTE
WebDownloader. Windows NT 4.0 users must download the Windows NT 4.0
Hot Fix dated July 7, 1997 in order to run the Fiery WebDownloader with
Netscape Communicator 4.x.