Kyocera Ci1000 Operating Instructions Manual page 86

5
5-8 Installing Software for Windows
Completing the Windows 3.1x connection
To print from Windows 3.1x you need to:
• Set up the Ci1000 to accept print jobs from your computer.
• Configure a port on each Windows 3.1x computer for the network or
connection type.
Selecting a printer port
When you install a printer, Windows assigns it to a default parallel printer port. If
the Ci1000 printer is connected to your computer through a network or you want
to assign it to a different port, you need to change the port assignment. For
information on which port to use, see your system administrator.
T
O SELECT A PRINTER PORT
1. In the Control Panel window, double-click the Printers icon.
2. In the Printers window, select the Ci1000 in the Installed Printers list box.
3. Click Connect.
The Connect window appears.
4. Connect the Ci1000 to the same port as your network.
To print to a file, select FILE.
Printing to a file is useful if the Ci1000 is not at your site. However, if you select
the FILE port, you cannot print to a printer until you select a network or printer
port. (In some applications, you can select the FILE port from the application's
Print dialog box; this is preferable for temporary use since it doesn't require
resetting the port in the Control Panel.)
: