Kyocera Ci1000 Operating Instructions Manual page 83

5
5-5 Installing the PostScript Printer Driver for Windows 95
T IPX (N
O SET UP OVELL
1. Open the Windows 95 Control Panel.
2. Double-click the Network icon.
Make sure that IPX/SPX-compatible Protocol is listed in the Installed Network
Components section. For instructions, see your Windows 95 documentation.
3. Close the Control Panel.
4. Click the Start button, choose Settings, and then choose Printers.
5. Click the Ci1000 printer icon, and choose Properties from the File menu (or right-
click the printer icon, and left-click Properties).
6. Click the Details tab, and click Add Port.
A list of connection options is displayed.
7. In the Add Port dialog box, specify the network path, or click Browse for a display
of your network environment.
8. If you are using a NetWare file server, double-click the icon of the server you want
to use for printing to the Ci1000 and click OK.
9. Click the printer icon labeled with the NetWare print queue you will use and
click OK.
10. In the Add Port dialog box, verify that the network path is updated, and click OK.
To confirm the connection, you can print a Windows 95 test page.
11. Click the General tab in the Properties dialog box, and click Print Test Page.
You are ready to print to the Ci1000 from Windows applications. When you
select Print, jobs are routed to the print queue on the NetWare file server, and
then sent to the Ci1000.
) :
PRINTING