Kyocera Ci1000 Operating Instructions Manual page 132

6
6-32 Setup from the Control Panel and WebSetup
Service Setup tab
The Service Setup tab is used to set Windows Printing Service options. Windows
Printing Service enables the Microsoft SMB protocol, which supports peer-to-
peer printing, also known as Windows (WINS) or SMB printing.
— Enable this option to enable SMB (Server
Enable Windows Printing Service
Message Block), the file and printer sharing protocol built into Windows.
Enabling SMB allows the Ci1000 to be listed on the network so that Windows
clients can print to a particular print connection (Hold, Print, or Direct) on the
Ci1000 without any other networking software. For information on how to set up
a Windows client for Windows printing, see Operating Instructions.
Windows (SMB) printing runs over TCP/IP, so TCP/IP must be configured on all
the Ci1000 and on workstations that use Windows printing.
—The server name is the name that will appear on the network. It
Server Name
can, but does not have to, be the same name as the server name assigned in Server
Setup.
—Server comments (optional) can contain information about the
Server Comment
printer.