Installing Additional Memory; Kit Contents; Caution Notes; Installing Ram Dimms - Kyocera Ci1000 Operating Instructions Manual

8

8-7 Installing additional memory

Installing additional memory
The following section explains how to install a 16 or 32MB RAM (random access
memory) DIMM (dual in-line memory module) on the Ci1000.
To install the RAM DIMM (illustrated below) you will need to do the following:
• Remove the video controller board from the back of the printer.
• Replace the printer's 16MB RAM DIMM with a 16 or 32MB RAM DIMM, or
install a 16 or 32MB RAM DIMM in either of the two empty RAM slots on
the video controller board.
• Replace the video controller board.
I :
MPORTANT
printer's power plug.

Kit contents

• RAM DIMM

Caution notes

• Do not drop or bend the RAM DIMM.
• Do not touch the connector edge of the RAM DIMM.
• Protect the RAM DIMM from static electricity by keeping it in its anti-static
package until you are ready to install it.
• Avoid exposing the RAM DIMM to direct sunlight, high temperatures, or
humidity.

Installing RAM DIMMs

The video controller board ships with the following memory configuration:
• The first DIMM slot, numbered J5, is reserved for the printer's system software
ROM DIMM.
To avoid electric shock ensure your hands are dry before touching the