Kyocera Ci1000 Operating Instructions Manual page 165

7
7-31 Troubleshooting
Replace the imaging unit.
Replace the imaging unit.
Print several pages until the spots fade.
Replace the imaging unit; make sure that the old imaging unit is not exposed to
light for more than 45 seconds. If a new imaging unit does not correct the
problem:
• Put the old imaging unit back into the printer.
• Repack the new imaging unit.
Replace the fuser.
Print 5-10 pages of blank pages to clean the roller. If you still see the problem:
• Replace the oil supply roll.
If you still see the problem:
• Replace the fuser.
Replace the fuser (depending on your quality needs, you can continue to print
until the dark vertical lines appear).
Replace the oil supply roll.
Replace the imaging unit.
Replace the imaging unit.
Reinsert the imaging unit to correct the contact for the main charge grid.
Replace the imaging unit.
Replace the transfer unit.