Qlogic Scsi Utility - IBM xSeries 380 Hardware Maintenance Manual

Table of Contents

Advertisement

Table 9. BIOS Setup Exit Screen Menu Items.
Menu Item
Load Custom Defaults
Save Custom Defaults
Discard Changes

QLogic SCSI utility

The QLogic SCSI Utility allows you to configure the SCSI capabilities of the server.
You enter this utility during the reboot operation after the BIOS Setup Utility. To enter
the QLogic SCSI Utility, perform the following:
1.
Enter and complete the BIOS Setup Utility. For information on the BIOS Setup
Utility, see "Using BIOS Setup" on page 90.
2.
During the system reset performed after you exit the BIOS Setup Utility, watch the
monitor for the prompt that allows you to enter the QLogic Setup Utility. The
prompt asks you to press the <ALT+Q> key sequence.
3.
When you see the prompt for the QLogic Setup Utility, press the <ALT+Q> key
sequence.
4.
Navigate through the QLogic Setup Utility screens using the following keys
shown in Table 10.
Table 10. Using QLogic Setup Utility Screens.
Press
Enter
ESC
Lets you load setup with custom defaults. Clicking on the
menu item causes the system to prompt you for a Yes or No
response.
Yes loads setup values from a file previously saved through
the Save Custom Defaults menu item. You must specify the
file name.
No aborts the action.
Lets you save the current set of v alues into a file that you
could later load using the Load Custom Defaults menu item.
Clicking on the menu item causes the system to prompt you
for a Yes or No response.
Yes writes setup values to a file you specify. The file can be
used later to load setup values through the Load Custom
Defaults menu item.
No aborts the action.
Lets you discard the changed values you have accumulated
during this setup session. Clicking on the menu item causes
the system to prompt you for a Yes or No response.
Yes discards the setup values for the current setup utility
session.
No aborts the action.
Select an option
Go back to a previous screen.
Select the previous value in a menu option list.
Select the next value in a menu option list.
Description
To
Configuration
97

Advertisement

Table of Contents
loading

Table of Contents