Table of Contents
Advertisement
4.
5.
6.
7.
204
Hardware Maintenance Manual: xSeries 380
Loosen the screw that secures the non-hot plug PCI adapter board cover ( 1 ).
Grasp the cover by its exposed, long side and lift the cover away from the chassis.
You can completely remove the cover if you want by unseating the slotted hinge
( 2 ). Access is now available to the Legacy I/O board.
Loosen and remove the thumbscrew that secures the end of the board at the rear
of the chassis ( 1 ).
Release the plastic retaining mechanism that secures the end of the board nearest
the front of the chassis ( 2 ).
Advertisement
Table of Contents
