Keyboard Test Error Codes - IBM xSeries 380 Hardware Maintenance Manual

Keyboard test error codes

242
Hardware Maintenance Manual: xSer ies 380
Code/Explanation
0527h CD Buffer error
0528h Pattern compare failed.
Check pattern did not match
0529h CD-ROM random read error 1.
0550h Read timeout
0560h File not found
0580h Cannot allocate memory
0590h Command not supported.
Unable to run the test on the
device.
Code/Explanation
0400h AMIDiag found a keyboard
controller interface error.
0401h AMIDiag issued commands
to the keyboard controller and
received improper responses.
0410h - 0411h Keyboard clock line
is stuck low/high. The clock line to
the keyboard is stuck either low or
high.
FRU/Action
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Check if AMIDiag CD is present in drive
2. Confirm that drive is configured
3. Check drive cables and connections
4. Drive
5. System I/O Board or SCSI add-on controller
Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
1. Check if AMIDiag CD is present in drive
2. Confirm that drive is configured
3. Check drive cables and connections
4. Drive
5. System I/O Board or SCSI add-on controller
1. Restart the system and retry
1. Confirm that drive is configured
2. Check drive cables and connections
3. Drive
4. System I/O Board or SCSI add-on controller
FRU/Action
1. Keyboard
2. Legacy I/O Board
1. Keyboard
2. Legacy I/O Board
1. Keyboard
2. Legacy I/O Board