Table of Contents
Advertisement
Test parameters
The following box appears when you select Test Parameters from the Edit Batch
Parameters box. Each item in this box is the name of an AMIDiag menu. When you
select an AMIDiag menu name from this menu and press <Enter>, all AMIDiag tests
on the menu are listed. Choose the tests to be run in batch mode by highlighting the
test and pressing <Enter>.
For example, if you select System, the following screen appears. If you highlight a test,
such as Basic Functionality Test, the test parameters for that test are displayed. Set the
parameters and select another diagnostic test. Select CONTINUE when you have set
all test parameters for the AMIDiag test to be run in batch mode.
66
Hardware Maintenance Manual: xSeries 380
Advertisement
Table of Contents
