IBM xSeries 380 Hardware Maintenance Manual page 104

Table 6. BIOS Setup Advanced Screen Menu Items.
Primary
Menu Item Menu Item
IDE IDE Controller
Configuration
Hard Disk Pre-Delay
Primary IDE Master
Secondary IDE
Master
Chipset Request Bus Parking
Configuration
BINIT Input
In-Order Queue
Depth
BSP Jumper Selected
CPU Work Arounds
Memory Related
Items
94
Hardware Maintenance Manual: xSeries 380
Sub
Value
[Both]
Disabled
Primary
Secondary
[Disabled]
3, 6, 9, 12,
15, 21, 30
seconds
[drive_id]
Not
Installed
[drive_id]
Not
Installed
[Disabled]
Enabled
[Disabled]
Enabled
[08]
01
[Disabled]
Enabled
[Auto]
Manual
Selects the IDE controller and hard disk drive type installed in
your system.
Both enables both IDE controllers.
Disabled disables the integrated IDE controller.
Primary enables only the primary controller.
Secondary enables only the secondary controller.
Configures the hard disk pre-delay.
Enabled causes the BIOS to insert a time delay before
attempting to detect IDE drives in the system.
Disabled disables the pre-delay.
A drive-specific identifier for the primary IDE master device
currently installed in the system. Clicking on the value displays
two subsequent sub-menu items: Type and Use ARMD Drive
As.
Type specifies how the server perceives the device
(automatically, IDE or as an ATPI device).
Use ARMD Drive As specifies how to use the device (floppy,
auto or hard drive).
A drive-specific identifier for the secondary IDE master dev ice
currently installed in the system. Clicking on the value displays
a subsequent sub-menu item: Type.
Type specifies how the server perceives the device
(automatically, IDE or as an ATPI device).
Determines whether or not to park on the system bus.
Enables all host bus agents to enable BINIT observation logic.
Defines the in-order queue depth. When set to one, all agents
on the host bus limit their in-order queue depth to one with no
pipelining support.
Enters submenus that allow you to configure Processor
Dispersal, DET stalls and other processor settings.
Enters submenus that allows you to configure System ECC,
First Row Test Interval, Base Memory Test Interval, Ext.
Memory Test I nterval, Defective DIMM Mapout and Clear Bad
Memory Row Info.
Description