Parameters - Korg Triton-Rack Parameter Manual

Parameters

For details on the parameters, refer to the "EXB-MOSS
owner's manual" included with the EXB-MOSS.
Parameter names given in the "EXB-MOSS owner's man-
ual" are the names used when the EXB-MOSS is installed in
the TRITON/TRITONpro/TRITONproX, and will differ
from the names when it is installed in the TRITON-Rack.
However, the content of the explanations will remain the
same.
Viewing the parameters
This manual provides the following information on the
parameters.
• TRITON-Rack Parameters (p.257–p.268)
This shows the correspondence between the TRITON-
Rack parameter names and the parameter names printed
in the "EXB-MOSS owner's manual." Use the following
procedure to find the explanation for a parameter.
1 In the LCD screen of the TRITON-Rack, find the parame-
ter that you wish to learn about.
As an example, let's suppose that you want to learn
about the PROG 2.1: Ed-Basic, Prog Basic page "Mode"
parameter.
2 In the index of this manual, find the mode name and
page number shown in the LCD screen.
"Mode" →PROG 2.1: Ed-Basic →p. 257 of this manual
p.257 of this manual, "TRITON-Rack Parameters"
PROG 2.1: Ed–Basic
2.1–1: Basic (Prog Basic)
3
This is the reference page in the
TRITON-Rack "Parameter guide."
Please refer to the TRITON-Rack
"Parameter Guide" in conjunction with
the "EXB-MOSS owner's manual.
p.269 of this manual, "EXB-MOSS Parameter Index"
3
Release (Release Time)
Amp EG: Time ................................................... 5.1–3: AmpEG: L
EG1...4: Time .................................................... 5.2–1...4: EG1...4: L
Reso
Reed Model: Bell Character .............................. 2.3–1: Reed: Bell
Reso (Resonance)
Resonance: BPF Parameters ........................... 2.3–2: Resonance: BPF
Resonance
Filter: Filter A ..................................................... 4.1–1/3: Filter1/2
Noise Generator ............................................... 2.1–3: Noise Gen.
Brass Model: Lip Character ............................... 2.3–1: Brass: Lip
Retrigger (Retrigger Control)
Prog Basic: Voice Assign Mode ........................ 2.1–1: Prog Basic: Voice Assign
Rl (Release Time AMS2 Intensity)
Amp EG: Time Modulation ................................ 5.1–3: AmpEG: T Mod.
EG1...4: Time Modulation ................................. 5.2–1...4: EG1...EG4: T Mod.
Rosin
Bowed String Model: Bow Speed ...................... 2.3–2: Bowed String: Bow: Bow Speed
Routing
Filter: Routing .................................................... 4.1–1/3: Filter1/2
256
3 Find the desired parameter using the TRITON-Rack's
4 Use the reference page and parameter name listed beside
• EXB-MOSS Parameter Index (p.269–p.272)
1 In the "EXB-MOSS owner's manual," find the parameter
2 Use the page number and parameter name to find the
3 Use the reference page and parameter name listed
Reference page in
TRITON-Rack "EXB-MOSS owner's
parameter name manual"
TRITON-Rack
p.
OSC 1/OSC 2 p.12
Sub p.14
Mode p.12
Hold p.13
Priority p.13
Retrigger p.12
Threshold p.12
Type p.13
Key p.13
Random p.13
Page 12 of the "EXB-MOSS owner's manual" included with EXB-MOSS
1–1a: Multi OSC Setup
p.266
Here, you can make settings for the oscillator.
p.266
The parameters that are set in "1–3: OSC 1" and "1–4:
OSC 2" will differ depending on the oscillator type
p.262
that is selected here. (Link: 1–2a, 1–2b)
OSC 1 (Oscillator 1 Type)
p.260
Selects the oscillator type for oscillator 1.
For details on the oscillator types, refer to "Features of
p.265
the oscillator" on p. 4 of this manual.
p.258
Single Size
p.262
2 Standard
Comb Filter
p.257 VPM (Variable Phase Moulation)
Resonance
Ring Modulation
p.266
Cross Modulation
p.266
Sync Modulation
Organ Model
p.264 E. Piano Model
Double Size
Brass Model
p.265
LCD screen and the LCD screen, mode name, and page
number listed in this manual.
(See the solid lines with arrows in the diagram below.)
the desired parameter name to find the relevant location
in the "EXB-MOSS owner's manual." (See the solid lines
with arrows in the diagram below.)
You can perform a reverse-lookup to see which TRITON-
Rack screen contains a parameter described in the "EXB-
MOSS owner's manual." Use the following procedure.
name that you want to look up.
parameter name in the EXB-MOSS Parameter Index.
(See the dashed lines with arrows in the diagram below.)
beside the desired parameter name to find the TRITON-
Rack parameter name listed in TRITON-Rack Parame-
ters.
Parameter name printed in
"EXB-MOSS owner's manual"
EXB-MOSS
1–1a: Multi OSC Setup: OSC 1 (Oscillator 1 Type)/OSC 2 (Oscillator 2
Type)
1–2c: Sub OSC: Waveform
1–1c: Voice Assign Mode: Poly, Mono
1–1c: Voice Assign Mode: Hold
1–1c: Voice Assign Mode: Priority
1–1c: Voice Assign Mode: Retrigger (Retrigger Control)
1–1c: Voice Assign Mode: Threshold (Retrigger Control Threshold)
1–1d: Scale: Type (Scale Type)
GLOBAL 3.1–1a: User Octave Scale (PG p.114), GLOBAL
3.1–2b: User All Notes Scale (PG p.115)
1–1d: Scale: Key (Scale Key)
1–1d: Scale: Random
Detune
Detunes the notes that are sounded simultaneously by
the Unison function.
1–1c: Voice Assign Mode
[Standard...Bowed String Model]
Here, you can specify how notes will sound when
keys are pressed.
Poly, Mono (Single, Multi)
Selects whether the sound will be played monophoni-
cally or polyphonically.
Poly: Polyphonic playing
Mono (Single): Single-triggered monophonic playing
Mono (Multi): Multi-triggered monophonic playing.
Retrigger (Retrigger Contol)
"Retrigger" refers to the action of resetting the EG and
1
LFO at the time of note-on (the EG will return to its
start level, and the LFO will return to the beginning of
the cycle of its waveform). Here you can select the
controller which will specify whether or not the sound
will be retriggered when a note-on occurs.
4
[0...99]
When Poly is selected, the Retrigger Control
and Threshold parameters will be unavailable.
[Off...MIDI:CC#83]