Table of Contents
Advertisement
File contains unsupported data
Meaning: For an AIFF file etc., you attempted to load a file
format that the TRITON series does not support.
Action:
If possible, use a computer etc. to convert the data
into a format supported by the TRITON series,
and load it.
File is read-only protected
Meaning: You attempted to write to a file or to delete a file
that had a read-only attribute.
Meaning: You attempted to save a file to a floppy disk that
contained a read-only file of the same name.
Action:
Save the file with a different name.
File unavailable
Meaning: You attempted to load or open a file whose format
was incorrect.
File/path not found
Meaning: When loading a sample file in Disk mode, the file
name specified in the dialog box for selecting a
directory hierarchy or other media did not exist in
the specified location.
Meaning: When executing the Disk mode Utility command
"Delete," the specified file did not exist.
Meaning: When executing the Disk mode Utility command
"Copy" and you used a wild card to specify the
copy file name, the specified file was not found.
Alternatively, the length of the copy source path
name exceeded 76 characters.
Meaning: In Disk mode when you used the [F6] ("Open")
key to open a directory, the path length including
the selected directory name exceeded 76 charac-
ters.
Action:
Check the file or directory.
Front sample data used in rear sample
Meaning: When executing the Sampling mode function
Sample Edit "Link," the sample data of the front
sample was also used by the rear sample, and
thus could not be overwritten.
Action:
Do not use Overwrite; specify a different sample
as the save destination.
I
Illegal file description
Meaning: The filename that you specified when saving a file
or creating a directory contained invalid charac-
ters.
Action:
Change the filename you are specifying. Filena-
mes not permitted by MS-DOS cannot be used as
a filename.
Illegal SMF data
Meaning: You attempted to load a file that was not a Stan-
dard MIDI File.
Illegal SMF division
Meaning: You attempted to load a Standard MIDI File that
was timecode-based.
Illegal SMF format
Meaning: You attempted to load a Standard MIDI File of a
M
Measure size over limit
Meaning: When loading a Standard MIDI File, the number
Meaning: The attempted edit operation would cause the
Action:
Medium changed
Meaning: When executing the Disk mode Utility "Copy,"
Medium write protected
Meaning: The floppy disk or other media to which you
Action:
Memory full
Meaning: In Multi mode when editing a multi or pattern,
Action:
Meaning: While realtime recording in Multi mode, there is
Can't overwrite
Action:
Meaning: In Disk mode when loading a Standard MIDI File,
Action:
Memory overflow
Meaning: In Disk mode when using "Save Exclusive" to
Action:
Meaning: In Disk mode, you attempted to load more sample
Action:
Meaning: Meaning: When you executed the Disk mode
format other than 0 or 1.
of events in a measure exceeded the maximum
(approximately 10,000 events).
maximum number of events in a measure
(approximately 10,000) to be exceeded.
Use event editing etc. to delete unwanted data.
the media was exchanged or ejected, and it was
not possible to copy between separate media on
the same drive.
attempted to save is write-protected.
Turn off write protect on the floppy disk or other
media, and execute the command once again.
etc. the total data of all multi has used up all of the
sequence data memory, and further editing is not
possible.
Delete other multi data etc. to increase the amount
of free memory.
no more free memory to accommodate the
recorded data, so recording has been forcibly
halted.
Delete other multi data etc. to increase the amount
of free memory.
the sequence memory has filled up.
Delete multi data. (If necessary, save the data
before deleting it.)
receive exclusive data, the sequence memory has
filled up.
If you are receiving two or more sets of exclusive
data, transmit them separately to the TRITON-
Rack.
waveform data than there was free memory
capacity.
In Sampling mode, execute Delete sample to cre-
ate free space in the sample waveform data area,
and re-load the data.
command "Load to Demo Song" or the DEMO/
SNG page "Make Demo Song," the size of the
demo song data exceeded the capacity of the
Demo Song area.
231
Advertisement
Chapters
Table of Contents
