Korg Triton-Rack Parameter Manual page 141

the media when saving," and use the procedure given
there to save the data.
When you save, files will be created in the current direc-
tory. If the data you save extends across two or more
disks, these files will be divided. In addition to the .PCG,
.SNG, and .KSC files that will be created with the speci-
fied filename, one directory will also be created. The files
listed in NEWFILE.KSC will be saved in this directory.
Save PCG & Multi
This command saves all internal memory programs, combi-
nations, drum kits, user arpeggio patterns, and global set-
tings as a .PCG file, and saves multi to a .SNG file on the
specified media.
This command is valid only when the current directory is a
DOS directory.
1 Select "Save PCG & Multi" to access the following dialog
box.
2 Use the [F5] ("Name") key to move to the text dialog box,
and specify the filename ( BG p.38). For example if you
specify NEWFILE and execute the save command, files
named NEWFILE.PCG and NEWFILE.SNG will be saved
to the media.
3 Press the [F6] ("S.Item") key to move to the dialog box
where you will specify the data to be saved, and check
the check boxes for the banks that you wish to save.
Banks whose check boxes are unchecked will not be
saved.
Save All (PCG, SNG and KSC): 3
4 To save the data, press the [F8] ("OK") key. To cancel
without saving, press the [F7] ("Cancel") key.
Save PCG
This command saves all internal memory programs, combi-
nations, drum kits, user arpeggio patterns, and global set-
tings as a .PCG file.
This command is valid only when the current directory is a
DOS directory.
1 Select "Save PCG" to access the following dialog box.
2 Use the [F5] ("Name") key to move to the text dialog box,
and specify the filename ( BG p.38). For example if you
specify NEWFILE and execute the save command, a file
named NEWFILE.PCG will be saved to the media.
3 Press the [F6] ("S.Item") key to move to the dialog box
where you will specify the data to be saved, and check
the check boxes for the banks that you wish to save.
Banks whose check boxes are unchecked will not be
saved.
Save All (PCG, SNG and KSC): 3
4 To save the data, press the [F8] ("OK") key. To cancel
without saving, press the [F7] ("Cancel") key.
134
Save Multi
This command saves all multi from internal memory as a
.SNG file.
This command is valid only when the current directory is a
DOS directory.
1 Select "Save Multi" to access the following dialog box.
2 Use the [F5] ("Name") key to move to the text dialog box,
and specify the filename. For example if you specify
NEWFILE and execute the save command, a file named
NEWFILE.SNG will be saved to the media.
3 To save the data, press the [F8] ("OK") key. To cancel
without saving, press the [F7] ("Cancel") key.
Save Sampling Data (Multisamples and Samples)
When this command is executed, the following multisample
and sample data will be saved to media as Korg format
.KMP files, .KSF files, and a .KSC file that collects these files.
This is valid only when the current directory is a DOS direc-
tory.
• Multisample and sample data recorded or edited in
Sampling mode
• Multisample and sample data loaded in Disk mode
• Multisample and sample data in internal sampling
RAM memory
1 Select "Save Sampling Data" to access the following dia-
log box.
2 Use "To" to specify the contents that will be saved. (All
content will be saved in Korg format.)
All: All multisamples and samples from the TRITON-Rack's
internal memory will be saved as .KMP files and .KSF files.
Simultaneously, a .KSC file and a directory to contain these
files will also be created and saved.
The filename will be the .KSC filename and the directory
name.
All Multisamples: All multisamples and samples (i.e., sam-
ples used by the multisamples) will be saved as .KMP files
and .KSF files. Simultaneously, a .KSC file and a directory to
contain these files will also be created and saved.
The filename will be the .KSC filename and the directory
name.
All Samples: All samples will be saved as .KSF files. Simul-
taneously, a .KSC and directory to contain these files will
also be created and saved.
The filename will be the .KSC filename and the directory
name.
One Multisample: The selected multisample will be saved
as a .KMP file. Simultaneously, a directory will also be cre-
ated, and the samples used by the multisample will be saved
in that directory.
The filename will be the .KMP filename and the directory
name.
Initially, the filename will automatically be set to the first
five characters (uppercase) of the sixteen-character multi-
sample name + the multisample number.
[Examples]
000: NewMS_ _ _ _ _ _000 → NEWMS000.KMP
001: 108bpmDrLoop00 → 108BP001.KMP