096: Rotary Sp Od (Rotary Speaker Overdrive); Feedback -100; Sets The Feedback Amount; Hidamp (High Damp) 0 - Korg Triton-Rack Parameter Manual

Hide thumbs Also See for Triton-Rack:
Table of Contents

Advertisement

Feedback

Sets the feedback amount

g
HiDamp (High Damp)
Sets the damping amount in the high range
InLvl Mod (Input Level Dmod [%])
Sets the modulation amount of the input level
h
Src (Source)
Selects the modulation source for the input level
Spread
i
Sets the width of the stereo image of the effect sound
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
j
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: L/R
When you select Up/Down for this parameter, the pitch shift
amount for the right channel will be reversed. If the pitch shift
amount is positive, the pitch of the left channel is raised, and the
pitch of the right channel is lowered.
096: Rotary SP OD
(Rotary Speaker Overdrive)
This is a stereo rotary speaker effect. It has an internal speaker
simulator that simulates overdrive (recreating the amp distor-
tion) and characteristics of the rotary speaker, producing a
very realistic rotary speaker sound.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Horn
Rotary Speaker
+
Overdrive
Rotor
Speaker Simulation
Right
D
-mod
On/Off
D
-mod
Mode Switch: Rotate/Stop
D
-mod
Speed Switch: Slow/Fast
D
-mod
Manual Speed Control
OD (Overdrive)
Switches overdrive on/off.
(Source)
a
Selects the modulation source that switches overdrive on/off
(Sw)
Selects the switching mode of the modulation source that switches
overdrive on/off
OD Gain (Overdrive Gain)
Determines the degree of distortion
b
Level (Overdrive Level)
Sets the overdrive output level
OD Tone (Overdrive Tone)
Sets the tonal quality of overdrive
c
SpSim (Speaker Simulation)
Switches speaker simulation on/off
Mode (Mode Switch)
Switches between speaker rotation and stop
(Source)
d
Selects the modulation source that toggles between rotation and stop
(Sw)
Selects the switching mode of the modulation source that toggles
between rotation and stop
–100...+100
Fx:038
0...100%
–100...+100
Fx:037,
Off...Tempo
Fx:037
–100...+100
Fx:043
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Wet / Dry
Mic Distance
Horn/Rotor
Balance
Mic Spread
Wet / Dry
Off, On
Off...Tempo
Tggl, Mmnt
0...100
0...100
0...15
Off, On
Rotate, Stop
Off...Tempo
Tggl, Mmnt
Fx:040
Speed (Speed Switch)
Switches the speaker rotation speed between slow and fast.
(Source)
e
Selects the modulation source that toggles between slow and fast
(Sw)
Selects the switching mode of the modulation source that toggles
between slow and fast
H/R.Bal (Horn/Rotor Balance)
Sets the volume level balance between the high-range horn and low-
range rotor
f
ManuSp (Manual Speed Control)
Sets the modulation source in case the rotation speed is changed
directly
Horn Accel (Horn Acceleration)
How quickly the horn rotation speed in the high range is switched
g
Ratio (Horn Ratio)
Adjusts the (high-range side) horn rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
Rotor Accel (Rotor Acceleration)
Determines how quickly the rotor rotation speed in the low range is
switched
h
Ratio (Rotor Ratio)
Adjusts the (low-range side) rotor rotation speed. Standard value is
1.0. Selecting "Stop" will stop the rotation
MicDistance
Distance between the microphone and rotary speaker
i
Spread (Mic Spread)
Angle of left and right microphones
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
j
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: (Sw)
This parameter determines how to switch on/off the overdrive
via a modulation source.
When "(Sw)" = Tggl (Toggle), overdrive is turned on/off each
time the pedal or joystick is operated.
Overdrive will be switched on/off each time the value of
the modulation source exceeds 64.
When "(Sw)" = Mmnt (Moment), overdrive is applied only when
you press the pedal or operate the joystick.
Only when the value for the modulation source is 64 or
higher, the overdrive effect is applied.
Slow, Fast
Off...Tempo
Tggl, Mmnt
Fx:040
Rot, 1...99, Hrn
Off...Tempo
Fx:040,
0...100
Fx:040
Stop, 0.50...2.00
0...100
Fx:040
Stop, 0.50...2.00
0...100
Fx:040
0...100
Fx:040
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
199

Advertisement

Table of Contents
loading

Table of Contents