Korg Triton-Rack Parameter Manual page 119

from the arpeggiator will not be transmitted.
Local Control On/Off
Local Control
The TRITON-Rack's controllers
MIDI IN
Local Control
Note Receive
This specifies which of the incoming note numbers will be
sounded. If you wish to connect another TRITON-Rack or
TRITON series instrument to double the polyphony, set one
unit to Even and the other unit to Odd so that one or the
other unit will sound.
All: All note numbers will be received. Normally you will
leave this set to All.
Even: Even-numbered notes (C, D, E, F#, G#, A#) will
sound.
Odd: Odd-numbered notes (C#, D#, F, G, A, B) will sound.
This setting has no effect on the MIDI data that is
received.
MIDI OUT
MIDI IN
MIDI keyboard etc.
MIDI Clock
Set this parameter when you wish to synchronize an exter-
nal MIDI device (sequencer or rhythm machine etc.) with
the arpeggiator, pattern sequencer, or RPPR function of the
TRITON-Rack.
Internal: The arpeggiator, pattern sequencer, and RPPR
function will synchronize to the TRITON-Rack's own inter-
nal clock.
Select the Internal setting when using the TRITON-Rack by
itself, or when you want the TRITON-Rack to be the master
(controlling device) so that another connected external MIDI
device will synchronize to the MIDI Clock messages trans-
mitted from the TRITON-Rack.
External: The arpeggiator, pattern sequencer, and RPPR
function of the TRITON-Rack will synchronize to MIDI
Clock messages transmitted from an external MIDI device
connected to the MIDI IN connector.
Select the External setting when using the TRITON-Rack as
a slave (controlled) device so that it will synchronize to
another connected external MIDI device. The TRITON-Rack
will respond to MIDI Realtime messages (Start, Stop, Con-
tinue, Song Select) from an external sequencer.
During Audition playback or Demo song playback, the
playback will use the specified tempo regardless of the
"MIDI Clock" setting.
2.1–1b: MIDI Filter
Enable Program Change
On (Checked): Program changes will be transmitted and
received.
In Program mode (PROG 1.1: Play), the program will be
switched when a program change message is received on
the global MIDI channel specified by "MIDI Channel" (2.1–
1a). When you switch programs, a program change message
112
Play
Pattern sequencer
Off
Record
On
Arpeggiator/RPPR
Trigger
MIDI OUT
Off
On
[All, Even, Odd]
MIDI THRU
MIDI IN
TRITON-Rack#1 TRITON-Rack#2
ODD
EVEN
[Internal, External]
[Off, On]
will be transmitted on the global MIDI channel.
In Combination mode (COMBI 1.1: Play), the combination
will be switched when a program change message is
received on the global MIDI channel. However, it is possible
to set the "Combi (Combi Change)" parameter so that the
Tone
combination is not switched. When a program change is
generator
received on the channel specified for each timbre by "MIDI
Channel" (COMBI 3.1–1a), the program of that timbre will
be switched. However, the program changes for each timbre
will be affected by the setting of the "Program Change"
parameter (COMBI 4.1–1a).
When you switch combinations, a program change message
will be transmitted on the global MIDI channel, and also
transmitted simultaneously on the channel of timbres whose
"Status" (COMBI 3.1–1a) is set to EXT or EX2.
In Multi mode, incoming program change messages on a
channel that corresponds to a track whose "Status" (MULTI
3.1–1/2a) is set to INT or BTH will switch programs on that
track. When you select a multi or playback patten data, pro-
gram changes will be transmitted on the channels of tracks
whose "Status" is set to BTH, EXT, or EX2.
Off (Unchecked): Program changes will not be transmitted
or received.
Bank (Bank Change)
On (Checked): The Bank Select control change message will
be transmitted together with program change messages.
This is valid when "Enable Program Change" is checked.
Off (Unchecked): Bank Select messages will not be transmit-
ted or received.
Combi (Combi Change)
On (Checked): When in COMBI 1.1: Play, an incoming pro-
gram change message on the global MIDI channel set by
"MIDI Channel" (2.1–1a) will switch combinations. This is
valid when "Enable Program Change" is checked. An
incoming program change on a channel other than the glo-
bal MIDI channel will switch the program of any timbre that
matches that MIDI channel.
Off (Unchecked): An incoming program change message on
the global MIDI channel will switch the program of any tim-
bre whose "MIDI Channel" (COMBI 3.1–1a) matches the
global MIDI channel. The combination will not be switched.
The program changes for each timbre will be affected by the
setting of the "Program Change" parameter (COMBI 4.1–
1a).
AfterT (After Touch)
On (Checked): MIDI after touch messages will be received.
Off (Unchecked): MIDI after touch messages will not be
received.
Ctrl Change (Control Change)
On (Checked): Control change messages will be received.
Off (Unchecked): Control change messages will not be
received.
Exclusive
On (Checked): System exclusive data will be transmitted
and received.
Check this setting when you wish to use a connected com-
puter etc. to edit the TRITON, or vice versa.
Off (Unchecked): System exclusive data will neither be
transmitted nor received. Normally you will leave this
unchecked.
However, system exclusive data will be transmitted and
received while the Utility ("Dump Program"–"Dump
Multi") of this page are displayed.
[Off, On]
[Off, On]
[Off, On]
[Off, On]
[Off, On]