Korg Triton-Rack Parameter Manual page 147

2 The song data will be loaded as the corresponding multi
data. In Multi mode, you can edit the data by deleting
multis (songs) and rearranging the order; edit multi
(song) parameters such as the multi (song) name; and
edit track parameters such as the program number/
bank.
3 Press the [DEMO/SNG] key (LED lit) to enter the
DEMO/SNG page.
4 Select the "Make Demo Song" utility to access the dialog
box.
5 To execute, press the [F8] ("OK") key. To cancel without
executing, press the [F7] ("Cancel") key.
When you execute this operation, drum kits and user
arpeggio patterns will be reset to the state in which they
were written. ( BG p.40 "About Global mode mem-
ory")
If you wish to save your edited drum kits or user arpeg-
gio patterns, write them into memory using the GLO-
BAL 5.1: DKit ( p.117) or GLOBAL 6.1: Arp.Pattern
( p.121) utility menu commands before you execute
"Make Demo Song."
The "Solo ON/OFF" and "Track Play Loop" -related
parameters specified for TRITON/TRITONpro/TRI-
TONproX songs will be ignored.
140