Pitch/Phase Mod; 016: St.chorus (Stereo Chorus); 017: St.harmniccho (Stereo Harmonic Chorus) - Korg Triton-Rack Parameter Manual

Hide thumbs Also See for Triton-Rack:
Table of Contents

Advertisement

Pitch/Phase Mod.

Pitch/phase modulation effects
016: St.Chorus
(Stereo Chorus)
This effect adds thickness and warmth to the sound by modu-
lating the delay time of the input signal. You can add spread
to the sound by offsetting the phase of the left and right LFOs
from each other.
Stereo In - Stereo Out
Left
LEQ
EQ Trim
LEQ
EQ Trim
Right
LFO: Tri / Sine
LFO Wave (LFO Waveform)
a
Selects LFO Waveform
LFO Phase
b
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
L Dly (L Pre Delay)
Sets the delay time for the left channel
e
R Dly (R Pre Delay)
Sets the delay time for the right channel
Depth
Sets the depth of LFO modulation
(Source)
f
Selects the modulation source of the LFO modulation depth
(Amount)
Sets the modulation amount of the LFO modulation depth
Pre EQ Trim
g
Sets the EQ input level
LoEQ (Pre Low EQ Gain)
Sets the gain of Low EQ
h
HiEQ (Pre High EQ Gain)
Sets the gain of High EQ
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
i
(Source)
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
160
HEQ
Chorus
HEQ
Chorus
LFO Phase
Triangle, Sine
–180...+180deg
0.02...20.00Hz
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Fx:009,
MIDI, 40...240
0.0...50.0ms
0.0...50.0ms
Off...Tempo
–100...+100
–15.0...+15.0dB
–15.0...+15.0dB
–Wet...–1:99, Dry, 1:99...Wet
Fx:010,
Off...Tempo
–100...+100
e: L Dly, e: R Dly
Setting the left and right delay time individually allows you to
control the stereo image.
017: St.HarmnicCho
(Stereo Harmonic Chorus)
This effect applies chorus only to higher frequencies. This can
be used to apply a chorus effect to a bass sound without mak-
ing the sound thinner. You can also use this chorus block with
feedback as a flanger.
Stereo In - Stereo Out
Left
Wet / Dry
High/Low Split Point
Right
Wet / Dry
LFO: Tri / Sine
LFO Wave (LFO Waveform)
a
Selects LFO Waveform
LFO Phase
b
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Fx:010
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
Off, On
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base (Base Note)
Fx:009
Selects the type of notes that specify the LFO speed
Fx:009
Times
Sets the number of notes that specify the LFO speed
1...16
Dly (Delay Time)
Fx:009
Sets the delay time from the original sound
e
Hi/Lo Split (High/Low Split Point)
Sets the frequency split point between the high and low range
Depth
Sets the depth of LFO modulation
0...100
(Source)
f
Selects the modulation source of the LFO modulation depth
(Amount)
Sets the modulation amount of the LFO modulation depth
Feedback
Sets the feed back amount of the chorus block
0...100
g
HiDamp (High Damp)
Sets the high range damping amount of the chorus block
Lo Level (Low Level)
Sets the low range output level
h
Hi Level (High Level)
Sets the high range (chorus) output level
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
i
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
Low Level
Chorus/Flanger
High Level
High Damp
Feedback
High Damp
High Level
Chorus/Flanger
Low Level
LFO Phase
Triangle, Sine
–180...+180deg
0.02...20.00Hz
Fx:009,
–20.00...+20.00Hz
Fx:009,
MIDI, 40...240
0.0...50.0ms
–100...+100
–100...+100
Dry, 1:99...99:1, Wet
–100...+100
Wet / Dry
Wet / Dry
Fx:010
Off...Tempo
Off, On
Fx:009
Fx:009
1...16
Fx:009
1...100
0...100
Off...Tempo
0...100%
0...100
0...100
Off...Tempo

Advertisement

Table of Contents
loading

Table of Contents