Korg Triton-Rack Parameter Manual page 135

14) Load Global Setting:
Global setting data in the .PCG file will be loaded.
This includes Global mode parameters other than drum
kits and user arpeggio patterns.
Memory protect, LCD screen contrast, and system clock
settings will not be loaded.
1 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
15) Load .SNG:
All data in the .SNG file will be loaded.
1 Set ".SNG Allocation" to specify how the multi data of
the .SNG file will be loaded.
"1) Load .PCG: 3 "
2 Set "Load track events?" to specify whether the track
events of the .SNG file will be loaded.
"1) Load .PCG: 4 "
3 If a .PCG file or .KSC file of the same name exists in the
current directory, you can select the "Load ********.PCG
too" and "Load ********.KSC too" check boxes.
"1) Load .PCG: 1 "
4 If you checked "Load ********.PCG too," set ".PCG Con-
tents" to specify the bank of the .PCG file.
"1) Load .PCG: 2 "
5 If you checked "Load ********.KSC too," set ".KSC Alloca-
tion" to specify how the multisamples and samples in the
.KSC file will be loaded.
"1) Load .PCG: 5 "
6 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
When loading a .SNG file from a TRITON/TRITON-
pro/TRITONproX, the song data will be used as data
for the corresponding multi. In this case, the cue list file
will not be loaded. Also, if you select a TRITON/ TRI-
TONpro/TRITONproX cue list file, it will not be possi-
ble to execute "Load selected."
16) Load a Multi:
The selected multi data will be loaded into the multi number
you specified as the load destination.
1 If you wish to load a multi other than the selected multi,
use "From" to re-select the multi to be loaded.
2 In "To," select the loading destination multi.
3 Use "Load track events?" to specify whether track events
within the multi data will be loaded.
"1) Load .PCG: 4 "
4 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
128
selected icon
selected icon
selected icon
17) Load tracks:
The selected Track file will be loaded into the multi you
specify as the loading destination. However, it is not possi-
ble to specify an uncreated multi as the loading destination.
1 In "To," specify the loading destination multi.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
When loading a TRITON/TRITONpro/TRITONproX
.SNG file, song file, or track file, the track file data
(events of all tracks) cannot be used by the multi. How-
ever, TRITON/TRITONpro/TRITONproX .SNG files
loaded into Multi mode can be converted into demo
song data using the DEMO/SNG Utility "Make Demo
Data." This allows you to play the track file data (events
of all tracks) in the DEMO/SNG Play page.
18) Load Pattern Data:
The selected user pattern will be loaded into a user pattern
of the selected loading destination multi. However, it is not
possible to specify an uncreated multi as the loading desti-
nation.
1 If you wish to load a user pattern other than the one
already selected, use "From" to re-select the user pattern
that you wish to load.
2 In "To" and "Pattern," select the loading destination
multi and user pattern .
3 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
19) Load Standard MIDI File:
This command loads the selected Standard MIDI File into
the user patterns of the multi that you select as the loading
destination.
1 Use "To" to select the loading destination multi.
The data will be loaded starting at the number following
the last user pattern that was recorded or loaded into
internal memory.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
If you select an undefined file and select "Load
Selected," the file will be assumed to be a Standard
MIDI File, and the "Load Standard MIDI File" dialog
box will appear. When you execute loading, the data
will be loaded into the user patterns of the multi you
specified as the loading destination. However if the file
format is not appropriate, the operation will be invalid,
and an error message will be displayed.
selected icon
selected icon
selected icon