3: Utility - Korg Triton-Rack Parameter Manual

1 Select "Export Smpl AIF/WAV" to access the following
dialog box.
2 In "Format," select either AIFF or WAVE as the file for-
mat for export.
3 Press the [F5] ("Name") key to move to the text dialog
box, and specify the filename ( BG p.38).
4 In "To," specify the content that will be exported.
One Sample: The single selected sample will be
exported.
The filename will be the filename of the .AIF or .WAV file.
Initially, the filename will automatically be set to the first
four characters (uppercase) of the sixteen-character sam-
ple name + the sample number.
[Examples]
0000: NewSample_0000→NEWS0000.AIF
0001: C#3-EGuitar→C#3-0001.WAV
If the sample data being exported will not fit on a single
volume of media (e.g., floppy disk), it cannot be
exported.
All Samples: All samples will be exported.
It will not be possible to specify the filename. The filename
will automatically be assigned as the first four characters
(uppercase) of the sixteen-character sample name + the sam-
ple number.
Samples in One Multisample: All samples used by the
selected multisample will be exported.
Only five characters of the filename can be specified. The
five-character filename + the index number (001–128) in the
multisample will be assigned automatically.
Initially, the filename will automatically be set to the first
five characters (uppercase) of the sixteen-character multi-
sample name.
[Examples]
000: NewMS___000:
Sample selected for index 001 → NEWMS001.AIF
Sample selected for index 002 → NEWMS002.AIF
001: 108bpmDrLoop00:
Sample selected for index 001 → 108BP001.AIF
Sample selected for index 002 → 108BP002.AIF
When exporting All Samples or Samples in One Mul-
tisample, and all of the sample data does not fit on one
volume of media (e.g., floppy disk), another dialog box
will appear, directing you to specify the next media.
( p.133 "If the data does not fit on the media when
saving") However at this time if a single sample is
larger than the capacity of the media, the sample cannot
be exported. Either specify media with a larger capacity,
or press "Skip" to omit exporting that sample and pro-
ceed to exporting the next sample.
5 To export the data, press the [F8] ("OK") key. To cancel
without exporting, press the [F7] ("Cancel") key.
136
1.1–3: Utility
Here you can rename, copy, or delete the selected disk or
file, create a new directory, and set the date and time.
After selecting a disk or file, select the Utility menu [F8].
1.1–1a
1.1–1b
1.1–1c
1.1–3a: UTILITY
"Hide unknown file," "Translation" (1.1–1f)
For details on how to select the desired utility function, refer
to "PROG 1.1–1d: UTILITY."
Rename
This command renames the selected file or directory.
This command is valid only when a DOS file or a DOS direc-
tory is selected.
1 Select "Rename" to access the following dialog box.
2 Press the [F5] ("Name") key to access the text dialog box,
and modify the name ( BG p.38).
3 To rename the file or directory, press the [F8] ("OK") key.
To cancel, press the [F7] ("Cancel") key.
Copy
This command copies the selected file or directory.
This command is valid only when a DOS file or a DOS direc-
tory is selected.
1 Select "Copy" to access the following dialog box.
2 In the upper left of the dialog box, "Copy" indicates the
selected file and directory name.
If you wish to change the file or directory that will be
copied, use the [F5] ("Name") key to move to the text
dialog box, and specify the filename that you wish to
copy ( BG p.38).
(Can use */? as Wildcard): When you use the [F2]
("Name") key to access the text dialog box and specify
the name of the file or directory to be copied, you can use
"*" and "?" characters as wildcards. For example, if in the
above example you specify PRELOAD1.* (instead of
PRELOAD1.PCG), all filenames of PRELOAD1. with
any filename extension will be copied at the same time:
i.e., PRELOAD1.PCG, PRELOAD1.SNG,
PRELOAD1.KSC, ...
1.1–1d 1.1–1e
1.1–3a