Korg Triton-Rack Parameter Manual page 136

The program bank and program numbers loaded into
the multi will follow the "Bank Map (GLOBAL 1.1–2a)
setting. If "Bank Map" is KORG, bank I–A will be
selected for bank select 00.00 (MSB.LSB). If "Bank Map"
is GM(2), bank I–G will be selected.
It is not possible to load a Standard MIDI File longer
than 99 measures. In the case of a Format 1 Standard
MIDI File containing more than 16 tracks, identical
channels may be combined into a single pattern.
20) Load and Transmit MIDI Exclusive Data:
Load all data from the .EXL file and transmit it from MIDI
OUT.
1 If the .EXL file contains two or more exclusive data items,
use "Transmit Interval Time" to specify the time interval
that will be inserted between each item of exclusive data.
If you are transmitting the data to another TRITON-Rack,
the required time interval will depend on the type of
data. After transmitting all .PCG data, you must allow an
interval of approximately 16 seconds. For details refer to
the Global mode section on Damp ( GLOBAL 2.1–1c).
For other MIDI devices, refer to their owner's manual.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
The data size that can be transmitted will depend on
the amount of unused multi memory. The maximum is
840,000 bytes.
Loading sample data
The paragraphs 21) Load .KSC, 22) Load .KMP, and 23)
Load .KSF which follow explain how Korg format PCM
data files are loaded into the sample data RAM of the TRI-
TON-Rack.
About the sample data RAM
The TRITON-Rack is shipped from the factory with 16
Mbytes of sample data RAM. (One 16 Mbyte SIMM is
installed in a 72 pin SIMM slot.) By installing SIMM mod-
ules in three of the 72 pin slots, you can expand the sample
data RAM to a maximum of 96 Mbytes (three 32 Mbyte
SIMM's).
It is not possible to load an individual sample that is
larger than 16 Mbytes.
Limitations on the maximum number that can be loaded
• Multisamples: up to 1,000
• Samples: up to 4,000
• Samples used by multisamples: up to 4,000
About Korg format PCM data files
KSC files
Files with an filename extension of KSC (Korg SCript) con-
tain the names of .KMP and .KSF files.
When a .KSC file is loaded, the .KMP and .KSF files whose
names it contains will also be loaded. This is a convenient
way to load multiple multisamples and samples at once.
When this file is saved, a directory will be created with the
same name as the .KSC file, and the .KMP and .KSF files
listed in the .KSC file will be saved in that directory.
KMP files
Files with a filename extension of KMP (Korg Multisample
Parameter) contain the parameters which make up a single
multisample. These parameters also include the filename of
the .KSF files that are used by that multisample, so when a
.KMP file is loaded, the necessary .KSF files will also be
loaded at the same time.
When this file is saved, a directory will be created with the
same name as the .KMP file, and the .KSF files used by the
multisample will be saved in that directory.
KSF files
selected icon
Files with a filename extension of KSF (Korg Sample File)
contain the parameters and waveform data which make up
a single sample.
A .KSF file can be used as one of the samples used by a mul-
tisample. A .KSF file can also be selected and used as a drum
sample for a drum kit.
Loading multiple files
You can use wild cards to simultaneously load two or more
.KMP, .KSF, .AIF, .WAV., AKAI Program, or AKAI Sample
files from a directory.
In the dialog box, you can press the [F5] ("Name") key to
display the text input dialog box and use the wild cards "*"
and "?" in the selected filename so that multiple sample files
with the same extension (i.e., of the same format) will be
loaded simultaneously.
Example)
When a folder contains the following files, you have
selected "SFX_A_00.WAV," and want to use wild cards to
load multiple files simultaneously
PIANO.WAV, SFX_A_00.WAV, SFX_A_01.WAV,
SFX_B_00.WAV, SFX_B_01.WAV, SFX_C_00.WAV
Select "SFX_A_00.WAV," and choose the Utility "Load
selected" to display the dialog box.
Press the [F5] ("Name") key to access the text input dia-
log box, and specify a wild card. (For the renaming pro-
cedure, refer to BG p.38.)
The wild card "*" matches all subsequent characters.
The wild card "?" matches only one character.
You can use Utility 22) Load .KMP, 23) Load .KSF, 24)
Load .AIF, 25) Load .WAV, 26) Load AKAI Sample File,
27) Load AKAI Program File.
129