Master Eq - Korg Triton-Rack Parameter Manual

Master EQ

Master EQ
Use 7.3–4: Master EQ in Program, Combination, Multi modes.
You cannot use the Master EQ in Sampling mode.
You cannot use the Master EQ for the Insert Effects or Mas-
ter Effects.
Low Mid
Left
LEQ
LEQ
Right
Low Gain Mod.
D -mod
Low Gain Mod - Src
D -mod
High Gain Mod - Src
Low Cutoff
Sets the cutoff frequency of Low EQ (shelving type)
a
Gain
Sets the gain of Low EQ
Mid Cutoff
Sets the cutoff frequency of Mid EQ (peaking type)
Q
b Sets the band width of Mid EQ. With a higher value, the band
become narrower.
Gain
Sets the gain of Mid EQ
High Cutoff
Sets the cutoff frequency of High EQ (shelving type)
c
Gain
Sets the gain of High EQ
Low Gain Mod-Src
d
Selects the modulation source for Low Gain
High Gain Mod-Src
e
Selects the modulation source for High Gain
a: Gain, b: Gain, c: Gain
These parameters are linked with the "Master EQ Gain [dB]" (7.3–
1c) parameter of the Master FX.
d: Low Gain Mod-Src
For example, when this parameter is set to Kb1#17, you can con-
trol the EQ gain in the range from –18dB to +18dB during perfor-
mance using the [REALTIME CONTROLS] knob. At this time, set
Knob 1-B to Knob Mod1 (CC#17) for "Knob B-Assign" (Program,
Combination, Multi 2.2–1a). The 12 o'clock position of the knob
corresponds to the "Low Gain" value here.
e: High Gain Mod-Src
For example, when this parameter is set to Kb2#19, you can con-
trol the EQ gain in the range from –18dB to +18dB during perfor-
mance using the [REALTIME CONTROLS] knob. At this time, set
Knob 2-B to Knob Mod2 (CC#19) for "Knob B-Assign" (Program,
Combination, Multi 2.2–1a). The 12 o'clock position of the knob
corresponds to the High Gain value here.
High
L/Mono
PEQ HEQ
PEQ HEQ
R
High Gain Mod.
20...1.00KHz
–18.0...+18.0 (0.5step)dB
300...10.00KHz
0.5...10.0 (0.1step)
–18.0...+18.0 (0.5step)dB
500...20.00KHz
–18.0...+18.0 (0.5step)dB
Off...Tempo
Off...Tempo
203