I-Wave PE950/PE650 Installation Guide
Connecting Wiring
Plug the Panel-Mounted Transceiver wires
into the mechanism(s) that make up the
installation. During installation, be careful of
the following:
•
Remove power when plugging the panel-
mounted transceiver to any mechanism.
•
Respect polarity of the plug. DO NOT
connect backwards.
•
Be sure to plug in all eight pins of the
connector.
Plug
Plug
connector
connector
here
here
Connecting to Three-Circuit Clock Mechanism (P15ME)
Connecting to Three-Circuit Clock Mechanism (P15ME)
Connecting to Valve/Pump Switch Mechanism (PME)
Connecting to Valve/Pump Switch Mechanism (PME)
Copyright © 2006 Intermatic, Inc.
Plug
Plug
connector
connector
here
here