Deleting Any Existing Programming - Intermatic PE650 Installation And User Manual

0
I-Wave PE950/PE650 Installation Guide
The display panel on the unit provides pool
and spa water temperature information, and
makes it easy to control and program.
"OK" means "OK" means
Hand-Held Hand-Held
is communicating is communicating
with panel-mounted with panel-mounted
transceiver transceiver
"POOL" or "SPA" "POOL" or "SPA"
tells which mode tells which mode
the system is in the system is in
Detail on Hand-Held Remote Display Screen Detail on Hand-Held Remote Display Screen
Synchronizing the Hand-
Held with the Panel-Mounted
Transceiver
When you've finished physical installation
and wiring and have enabled power to the
control center, you need to synchronize
the Hand-Held with the Panel-Mounted
Transceiver.
This is a two step process: first, delete any
programming that might exist in the Hand-
Held Remote and Receiver, then synchronize
the two devices with each other.

Deleting Any Existing Programming

This procedure deletes any existing
programming from the Remote and Receiver
units so they are ready to be programmed
into the network of this installation.
Copyright © 2006 Intermatic, Inc.
When you see When you see
these numbers, it means these numbers, it means
that circuit is ON that circuit is ON
1 1 2 2 3 3
73 73
STA T STA T
OK OK
POOL POOL
4 4 5 5
Temp settings Temp settings
ºF ºF SET SET
for pool (P) for pool (P)
or spa (S) or spa (S)
P 73 P 73
S 85 S 85
Current Temp Current Temp
SPA SPA
of the Pool or Spa, of the Pool or Spa,
depending on depending on
whichever mode whichever mode
the system is in the system is in