Operating Programmed Functions - Intermatic PE650 Installation And User Manual


Setting Up Hand-Held Remote Transceiver

Operating Programmed Functions

Depending on how you have wired the
system, the five function buttons on the
Hand-Held Remote control the five circuits
in the Control Center. You should apply
the appropriate label to the five buttons
— describing the appropriate equipment
according to your installation — from the
assortment of labels supplied.
When you press any of these buttons, the
appropriate circuit toggles ON or OFF. In
addition, when the circuit is ON, the Hand-
Held Controller's display shows the circuit
number along the top of the screen.
Providing a brighter solution.™