Connection For Sta-Rite Heaters - Intermatic PE650 Installation And User Manual

Connection for Sta-Rite Heaters

1.
Turn off power to heater at main circuit
breaker panel.
.
Unbolt and remove the upper jacket
halves (Refer to heater owners manual).
.
Open control box cover.
.
Remove the factory-installed jumper
between the Fireman's Switch terminals.
5.
Connect two
#14 gauge
wires, designed
for use in hot
environments, to
the two black
wires, marked
heater
connection, on
the panel-
mounted
receiver in the I-Wave Control Center.
Attach the other end to the two spade
Providing a brighter solution.™
Install Panel-Mounted Transceiver
1