Setting Pool And Spa Temperatures - Intermatic PE650 Installation And User Manual


I-Wave PE950/PE650 Installation Guide

Setting Pool and Spa Temperatures

If connected and linked, the Hand-Held
Remote can control the independent water
temperatures of both the pool and spa.
1.
View the current
temperature on the
right side of the
Hand-Held Remote
Screen under the
word SET.
• P = current pool water set temperature
• S = current spa water set temperature
.
Press and release the <P/S> button if
necessary to change the system between
Pool and Spa mode. Depending on
which mode is selected, the word POOL
(lower left) or SPA (lower right) appears
on the screen
.
Press and release the <UP> or <DOWN>
arrow buttons to raise or lower the setting
to the desired temperature. You can
hold the button down and the value will
automatically change.
.
Release and release the arrow button
when the setting reaches the temperature
you want. After a few seconds, the
display returns to the current temperature
of the pool or spa, depending on which
mode you select.
Copyright © 2006 Intermatic, Inc.
72 72
STAT STAT
OK OK
POOL POOL
ºF SET ºF SET
P 72 P 72
S 85 S 85