Connection For Pentair Heater - Intermatic PE650 Installation And User Manual

16
I-Wave PE950/PE650 Installation Guide

Connection for Pentair Heater

1.
Remove heater
service door on your
Pentair Heater.
.
Separate the black
wires (common) from
each other.
.
Connect two #14 gauge wires, designed
for use
in hot
environ-
ments, to
the two
black
wires,
marked
heater connection, on the panel-mounted
receiver in the I-Wave Control Center
and attach the other end to the two black
wires on the heater.
.
Do not disconnect high limit or pressure
switches.
5.
Turn the heater thermostat(s) to maximum
setting.
6.
Turn the heater toggle switch on.
Copyright © 2006 Intermatic, Inc.