Intermatic PE650 Installation And User Manual page 29

Setting Up Hand-Held Remote Transceiver
6.
Press and release
the <2> function
button on the
Hand-Held to select
ADD TO GROUP.
The screen refreshes and displays only
the line 2 ADD TO GROUP.
.
Push and release
the black button
on the base of the
Panel-Mounted
Transceiver. The
screen returns to the full screen with the
word SUCCESS at the bottom, as shown.
.
Press and release the <CHLR> button
on the Hand-Held Remote to exit
programming mode. When you now
carry the Hand-Held Remote in the
problem area, you will now see the
words STAT OK on the left side of the
screen.
The repeater is now part of the network. You
can add more repeaters as necessary.
REMEMBER: When you have one or more
repeaters installed in a network, you increase
the response time: the time between when
you press a button on the Hand-Held
Remote and when the reaction takes place.
Providing a brighter solution.™
LEAR N LEAR N VER x VER x
2 ADD TO 2 ADD TO GROUP GROUP
LEAR N LEAR N VER x VER x
1 INC 1 INC LUDE NOD E LUDE NOD E
2 ADD TO 2 ADD TO GROUP GROUP
3 RES 3 RES ET N ODE ET N ODE
4 RES 4 RES ET C ONTROLLER ET C ONTROLLER
5 MOR E OP TION S 5 MOR E OP TION S
C EXI C EXI T T
SUC CESS SUC CESS
9