Everyday Use Of The Hand-Held Controller; Changing Between Pool And Spa - Intermatic PE650 Installation And User Manual

0
I-Wave PE950/PE650 Installation Guide
Everyday Use of the Hand-Held
Controller
The complete everyday functionality of the
pool/spa system you have installed can be
conveniently controlled using the Hand-Held
Remote.

Changing between Pool and Spa

If Valve Actuator (PE24VA) is installed in the
system, it directs water either to the pool or
the spa. To use the hand-Held Controller to
control this valve:
1.
Press and release
any button on the
Hand-Held Remote
to wake it from
sleep. (The unit
goes to sleep to conserve battery life
when it has been idle for 60 seconds.)
The screen display on the Hand-Held
should look generally like the example
on the right.
.
Note on the Hand-Held Remote Screen
the current mode for the system:
• POOL on the left side of the screen
indicates the pool temperature setting
(shown in the example).
• SPA on the right side of the screen
indicates the spa temperature setting.
Copyright © 2006 Intermatic, Inc.
72 72
STAT STAT
OK OK
POOL POOL
ºF SET ºF SET
P 72 P 72
S 85 S 85