Option One: The 35-Ft. Antenna Extension Cable (Pa121); Option Two: Repeaters (Ha04C) - Intermatic PE650 Installation And User Manual

Wave series hand-held remote transceiver panel-mounted transceiver
Table of Contents

Advertisement

6
I-Wave PE950/PE650 Installation Guide
Option One: The 35-ft. Antenna
Extension Cable (PA121)
The Antenna Extension Cable lets you move
the antenna into direct line of sight from the
area of operation — where the home owner
will be using the Hand-Held Remote.
1.
Unscrew the antenna from the top of the
Panel-Mounted Transceiver.
.
Screw the male end of the 35-ft. Antenna
Extension Cable into the top of the Panel-
Mounted Transceiver.
.
Run the cable underground from the
Control Center to the location that will
provide a direct line of sight between
the Hand-Held Remote and the area of
operation.
.
Screw the antenna into the female end of
the 35-ft. Antenna Extension Cable.
5.
Securely mount the end of the cable with
the antenna in the air.

Option Two: Repeaters (HA04C)

Repeaters are plugged into
120-volt electric outlets, and
cannot be used when outlets
are not available. If outlets are
available, repeaters are easy
to install and configure, and
can also be useful if the home
owner wants to be able to use
the Hand-Held Remote from
inside the house.
Copyright © 2006 Intermatic, Inc.
Transceiver
Transceiver
Repeater Module
Repeater Module
(HA0C)
(HA0C)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pe950

Table of Contents