Intermatic PE650 Installation And User Manual page 49

If it doesn't
work
Install the
Intermatic
35-ft. Antenna
Extension
Cable
Assembly
(PA121) to
improve or
broaden range.
NOTE: Only
an Intermatic
35-ft. Antenna
Extension Cable
Assembly
(PA121) will
work with
the I-Wave
Control. Contact
Intermatic to
order.
Check Out and Troubleshooting
Reference/Procedure
1.
If a 120 Volt outlet is not
strategically located or the
Transceiver Repeater Module
doesn't work, you may have to
remote the antenna on the Panel
Mount Transceiver located on
the top of the enclosure.
.
Remove the antenna located at
the top of the Panel-Mounted
Transceiver by turning the
antenna counter clockwise.
.
Install the female end of the
cable where the antenna was
previously connected. Install the
antenna on the other end of the
cable.
5.
Route the cable to a location
where the antenna will be in
the direct Line of Sight of the
area where the Hand-Held
Remote will be most frequently
used. Mount the cable and
antenna with the mounting kit
that comes with the Intermatic
35-ft. Antenna Extension Cable
Assembly (PA121).
.
Repeat the "What to do"
procedure to verify that your
installation was successful.
Providing a brighter solution.™
9