Using Two Hand-Held Controllers To Operate The System - Intermatic PE650 Installation And User Manual

Setting Up Hand-Held Remote Transceiver
NOTE: This button toggles between ON
and OFF.
That's it. When Booster is set to ON:
• The system will automatically turn
the cleaner pump OFF any time the
spa mode is activated, protecting the
cleaner pump.
• If the owner switches to pool mode
or to the high-speed pump mode,
the system waits 30 seconds before
powering ON the cleaner pump,
making sure there is adequate water in
the system.
Using Two Hand-Held Controllers to
Operate the System
When two or more Hand-Held Controllers
are being used to operate a system, each will
synchronize itself to the other according to
whatever function the other controller has
activated.
For example, if you press the <1> button on
one controller, the following will happen:
• Circuit 1 at the control center will
toggle on or off, depending on its
current state.
• The number 1 will appear along the top
of the Hand-Held Controller's screen.
• Then, a few seconds later, the number
1 will also appear along the top of the
second Hand-Held Controller's screen.
Providing a brighter solution.™
9