Intermatic PE650 Installation And User Manual page 50

50
I-Wave PE950/PE650 Installation Guide
Check that the buttons operate the
correct relays
What to do
1.
Wake up the Hand-Held Remote by pressing any
button.
.
Standing near the Control Center so you can observe
the relays clicking, press buttons <1> through <5>.
.
Verify that the correct relays operated.
.
Repeat this procedure to check other buttons and
relays.
If you can't complete this procedure successfully, follow
the steps below to troubleshoot.
If it doesn't
work
The wires
coming from
the Panel-
Mounted
Transceiver are
likely wired
backwards
to the
mechanisms
in the Control
Center.
Reference/Procedure
1.
Check the wiring. (See page 8.)
.
Reverse if necessary.
Copyright © 2006 Intermatic, Inc.