If Cool Down Period Is Not Required; The Connection At The Heater - Intermatic PE650 Installation And User Manual

1
I-Wave PE950/PE650 Installation Guide
directly to one of the heater control
wires.
.
Cut in half the yellow loop wire on
the back of the Three-Circuit Clock
Mechanism.
.
Connect one of the resulting yellow wires
to the remaining heater control wire.
.
Connect the other yellow wire to the
remaining brown wire coming from the
panel mount. (It doesn't matter which
goes with which.)

If Cool Down Period Is Not Required

If your heater manufacturer does not require
a cool down period, then simply connect the
heater control wires directly to the brown/
brown wires coming from the Panel-Mounted
Transceiver.

The Connection at the Heater

Locate your heater on the next pages and
follow the instructions for proper installation
of your I-Wave control center.
Copyright © 2006 Intermatic, Inc.