Disassembling The Hydrostop Unit; Disassembling The Seal Ring Retainer - Husqvarna FE 250 EU 2014 Repair Manual

6
FORK, TRIPLE CLAMP
Disassembling the h)'drosto unit
Info
The steps are identical for both fork legs.

Disassembling the seal ring retainer

Info
The steps are identical for both fork legs.
@)
-
Remove valve needle
Info
The adjusting tube can be used for this.
Preparatory work
-
Disassemble the fork legs.
Main work
-
Mount the hydrostop unit on a fitting hexagon socket and clamp into a vice.
O.
-
Remove sleeve
-
Remove shim stack @.
8.
-
Remove adapter
C,
-
Remove hub with washers@».
• Info
I
It is possible that only one washer or no washer is present.
-
Remove the O-ring from the hub.
-
(D.
Remove shim stack
@.
-
Remove washer
@).
-
Remove O-ring
Preparatory work
-
Disassemble the fork legs.
-
Remove the spring. (� p. 19)
-
Disassemble the cartridge.
from the piston rod.
(� p. 17)
(� p. 17)
(!!ll p. 20)
22