Disassembling The Piston Rod - Husqvarna FE 350 2014 Repair Manual

6
FORK, TRIPLE CLAMP
Disassembling the �iston rod
Info
The steps are identical for both fork legs, except for the hydrostop needle and valve.
e
-0
-
Remove seal rings
-
Remove pilot bushings �.
Preparatory work
-
Disassemble the fork legs. (,.... p. 17)
-
Remove the spring. (,.... p. 19)
-
Disassemble the cartridge. (,.... p. 20)
Main work
Degrease the piston rod.
-
Clamp the piston rod with the special tool as far up as possible.
I
Clamping stand (T14049S) (
-
Release hydrostop needle
✓ The valve @ usually remains in the hydrostop needle.
• Info
I O
201728-10
C, -
-
Remove the rebound shim stack 6).
-
Remove piston
-
Remove the compression shim stack (3.
-
Remove spring.
201730-10
0
-
Remove adapter
I
-
Remove spring
201788-10
CD 48.
and O-ring
,.... p. 269)
O
and remove it from the piston rod.
-
silver hydrostop needle on compression damping side.
red hydrostop needle on rebound damping side.
C,.
(D
with spring @ and washer.
@).
21