ENGINE
18
18.5.22
Installing the camshafts
18.5.23
Installing the timing chain tensioner
-
Mount and tighten nut (D.
Guideline
Nut, cylinder head
-
Pull up the timing chain and insert the intake camshaft
-
Place the timing chain over the camshaft gear of intake camshaft.
✓ Marking fj is positioned and is aligned with the edge of the cylinder head.
-
Ensure that bleeder@ is correctly positioned.
Slip in exhaust camshaft (D.
-
Place the timing chain over the camshaft gear and position the camshaft in the
bearing seat.
✓ Marking fj is positioned and is aligned with the edge of the cylinder head.
-
Clean all oil nozzles thoroughly and blow out with compressed air.
-
Mount the camshaft bearing bridge.
•
Info
I
Ensure that the dowel pins are seated properly.
8.
-
Position guide rail
0
-
Mount screws
and tighten from the inside to the outside.
Guideline
Screw, camshaft bearing
bridge
-
Position timing chain tensioner
M6
10 Nm
(7.4 lbf ft)
O.
M7x1
14 Nm
(10.3 lbf ft)
O
and insert it with new 0-ring @.
186
Lubricated with
engine oil
Lubricated with
engine oil