Initializing The Cpu Module - Mitsubishi Electric MELSEC iQ-F Series Training Manual

Connecting a Personal Computer
When Ethernet cable is used (direct connection)
Connect a personal computer directly to the CPU module, following the procedure below.
(3)

Initializing the CPU Module

[Online]  [CPU Memory Operation]
(1)
1.
Connect a personal computer to the CPU module using the
Ethernet cable.
2.
Select [Online]  [Current Connection Destination] on the
menubar of the engineering tool.
3.
Click the [Directy Connect to CPU] button.
4.
Select Ethernet adapter the personal computer uses.
5.
Click the [Connection Test] button, and check if the personal
computer is connected to the CPU module.
(4)
(5)
(6)
6.
Click the [OK] button.
1.
On the "Memory Management" window, click the [Initialization]
button.
2.
After the initialization processing completes, click the [Close]
button.
(2)
23