Fluke 5730A/03 Operator's Manual page 152

Multifunction calibrator
Hide thumbs Also See for 5730A/03:
Table of Contents

Advertisement

5730A
Operators Manual
*CLS
Description
Parameter
CUR_POST
Description
Parameter
CUR_POST?
Description
Parameter
Response
DATEFMT
Description
Parameter
DATEFMT?
Description
Parameter
Response
DBMOUT?
Description
Parameter
Response
Example
6-26
Table 6-5. Commands (cont.)
Sequential command.
(Clear status.) Clears the ESR, ISCR, the fault queue, and the RQS bit in the status byte.
This command terminates pending operation complete commands (*OPC or *OPC?).
None
Sequential command, ignored if not in remote.
Selects the binding posts non-boosted current output. Once set, the Calibrator retains
the current post setting during power-off periods.
NORMAL
(Selects the OUTPUT HI binding post)
AUX
(Selects the AUX CURRENT OUTPUT binding post)
IB5725
(Selects binding posts on the 5725A)
Sequential command.
Returns the binding posts for non-boosted current output.
None
(String) NORMAL
(The OUTPUT HI binding post is selected)
AUX
(The AUX CURRENT OUTPUT binding post is selected)
IB5725
(The 5725A binding posts are selected)
Determine the format for clock/calendar front panel date display and entry, for entering
and reading the date remotely with the CLOCK and CLOCK? commands, and for
displaying calibration dates on the front panel and in calibration reports.
MDY (Display: MM/DD/YY, remote and front panel entry: MMDDYY)
DMY (Display: DD.MM.YY, remote and front panel entry: DDMMYY)
YMD (Display: YYMMDD, remote and front panel entry: YYMMDD)
Returns the date format setting (see DATEFMT for its applications).
None
(String) MDY (Display: MM/DD/YY, date entry: MMDDYY),
DMY (Display: DD.MM.YY, date entry: DDMMYY), or
YMD (Display: YYMMDD, date entry: YYMMDD)
Sequential command.
Same as OUT? except that if output is ac V, the returned magnitude is converted to dBm
for the appropriate load (50Ω for wideband, 600 Ω standard ac V).
None
(Float) Output value
(String) Units (DBM, V, A, or OHM)
(Float) Frequency (0 if dc or ohms)
1.256983E+01,V,0
(12.56983 V)
+2.4203670E+01,DBM,4.4200E+02
1.9E+06,OHM,0
(1.9 MΩ)

Advertisement

Table of Contents
loading

This manual is also suitable for:

5730a5730a/05

Table of Contents