Fluke 5730A/03 Operator's Manual page 147

CAL_RPT?
Sequential command.
Description
Returns a report for a specified calibration activity (see Chapter 6 for format details).
CAL
Parameter CHECK
RAW
(String)
"<EOL>
Response
<formatted report>
"
CAL_RCSV?
Sequential command.
Description
Returns a report in CSV format for a specified calibration activity (see Chapter 6 for
format details).
CAL
Parameter CHECK
RAW
(String)
"<EOL>
Response
<formatted report>
"
CAL_SECURE
Sequential command. Ignored if not in remote. Lock/unlocks the calibration security
by use of a passcode. The passcode is entered as a quoted string of decimal digits.
Description (eg "12345"). To secure the Calibrator, no passcode is necessary. If an incorrect
password is entered, the Calibrator will automatically be resecured if it was
unsecured.
1. ON/OFF
Parameter
2. <passcode>
CAL_SECURE OFF, "12345"
Example
Unsecures the Calibrator.
CAL_SECURE ON
Example
Secures the Calibrator.
CAL_SECURE?
Description Sequential command. Returns the current security state of the Calibrator.
Parameter None
Response String
CAL_SECURE?
Example
Returns ON if the Calibrator is secured.
Table 6-5. Commands (cont.)
(Output change report for calibration)
(Output change report for calibration check)
(A list of all calibration constants)
(Output change report for calibration)
(Output change report for calibration check)
(A list of all calibration constants)
Remote Commands and Syntax
6
Commands
6-21