Omron SMARTSTEP A Series User Manual page 87

Standard Models and Specifications
● Wiring
10 +24 V CW CCW RUN
CCW Com-
0 0 V CW
mon
X1
(See
(See
note 1.)
note 1.)
24 V DC
Note 1. If these signals are input, the CQM1 output pulse can be input into the High-
speed Counter.
Note 2. Input this output signal to the CQM1 Input Unit.
Note 3. The XB contact is used to turn ON/OFF the electromagnetic brake.
Note 4. Phase Z is an open-collector output.
Note 5. Do not connect unused terminals.
Note 6. The 0-V terminal is internally connected to the common terminals.
Note 7. The following crimp terminal is applicable: R1.25-3 (round with open end).
INP ALM BKIR 19
Com-
ECRST Z RESET ALMCOM FG
mon
X1 XB
(See note 3.)
24 V DC
(See note 2.)
9
Chapter 2
2-61