Omron SMARTSTEP A Series User Manual page 50

Standard Models and Specifications
Control Output Circuits
■
● Sequence and Alarm Outputs
Servo Driver
(See note.)
Note Automatic-reset fuses are used for output protection. If overcurrent causes the fuse to operate,
current will not flow, and after a fixed period of time it will automatically reset.
● Phase-Z Output
Servo Driver
(See note.)
Automatic-reset fuses are used for output protection. If overcurrent causes the fuse to operate,
Note
current will not flow, and after a fixed period of time it will automatically reset.
2-24
To other output circuits
+
X
Di
−
Di: Diode for preventing surge voltage (Use speed diodes.)
32 Z
33 ZCOM
External power supply Maximum operating voltage: 30 V DC
24 V DC ± 1 V
Maximum output current: 50 mA
Controller
Maximum operating voltage: 30 V DC
Maximum output current: 20 mA
FG
Chapter 2