Table of Contents
Advertisement
Telemetry
This screen displays your choice of data from the
receiver.
Also warnings can be activated regarding the data.
For example, if the receiver voltage drops, the user
can be warned by an alarm (and vibration).
● Tap the [Telemetry] button in the Linkage menu to
call the setup screen shown below.
●Return to Linkage menu
Start slot number
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
Displaying data from the receiver
Choose the desired sensor and tap.
92
Display Sensors
Default display sensors can only be used by
connecting the sensors to the receiver. For display
of other sensors or to use the same type of sensor in
multiple cases, either register them via the "Sensor"
option on the Linkage menu or allocate the sensors
to empty slots to have them display on the Telemetry
screen. Refer to the previous "Sensor" explanation
pages for how to do this.
T a p p a g e b u t t o n t o
advance to next page.
( The number of pages
changes with the number
of sensor registration.)
Various telemetry data
Advertisement
Table of Contents
