FUTABA R7108SB Full Manual page 99

Vario Melody Setting
Range
When the variometer is greater
than this value, Vario melody is
not variable.
Setting range：
Offset value ～ +50 m/s
Initial value：5.0 m/s
Offset
This is the changing point of climb and sink. When the variometer
is greater than this value, Vario Melody is climb type. When the
variometer is less than this value, Vario Melody is sink type.
Setting range：Range ↑ setting value ～ Range ↓ setting value
Initial value：0.0 m/s
When the variometer is less than
this value, Vario melody is not
variable.
Setting range：
-50 m/s ～ Offset value
Initial value：-5.0 m/s
Tap the [Set] button
Current variometer
Next page
Deadband
When the variometer is less
than this value, Vario melody
is not output.
Setting range：
0 m/s ～ +50 m/s
Initial value：0.0 m/s
[The relation of Vario Melody settings]
Range↑
Variable melody
Deadband↑
Offset
Deadband↓
Variable melody
Range↓
99
*These settings can be
made for each sensor.
W h e n t h e v a r i o m e t e r i s
greater than this value, Vario
melody is not output.
Setting range：
-50 m/s ～ 0 m/s
Initial value：0.0 m/s
Fixed melody
Climb side
Discontinuous
Dead band
（Not sound）
Sink side
Continuous
sounds
Fixed melody
sounds