FUTABA R7108SB Full Manual page 145

● Wing type: Aileron 2 servos mounted fuselage selected
● Set 5CH → Gyro (GYA451AIL),
the Function menu of the Linkage menu.
● Gyro setting of the Model menu.
Rate ACT
1 OFF/ON
2 INH
3 ON/OFF
*Set so that Rate 1 is turned on at the back position of switch E
and Rate 3 is turned ON at the front position. Since switch E is
turned OFF at the center, Rate 2 remains [INH].
AVCS
GAIN 0％
NORMAL
When AVCS is used we
recommend that the
sensitivity CH be set to
the 3-position.
(Example) Setting three axis using a GYA450 and GYA451 (2)
7CH → Gyro2 (GYA451ELE),
Type Switch
GY SE
GY SE
8CH → Gyro3 (GYA450RUD),
Gyro
AVCS : 60% AVCS : 60%
Normal : 60% Normal : 60%
S.BUS Receiver
GYA451
GYA451
S.BUS2 port
GYA450
145
Control and Trim → "--"
Gyro ２ Gyro ３
AVCS : 60%
Normal : 60%
Aileron servo
Elevator servo
Rudder servo
: at