Rudder Expert - FUTABA R7108SB Full Manual

The rudder Expert menu allows for further refinement of the tail rotor gyro performance. "Rudder Expert" screen from the "EXPERT MENU
3D" screen.
Rudder Expert Rudder Expert
(1) RUD Ntr: Rudder servo neutral setting
This parameter is used to set the neutral position of the rudder servo. Po-
sition the rudder servo arm as perpendicular as possible to the tail rotor
pushrod prior to making adjustments with this parameter.
Setting ranges: -240 ~ 0 ~ +240 Initial value: +0
(2) EXP. AVCS / EXP. NORM: Rudder exponential
This parameter sets the feel of the tail rotor control around center. When
set to [0] the control curve is linear. Using a [+] value the tail rotor will be
more sensitive around neutral conversely, using a [-] value will soften the
feeling around neutral. The RUD EXP parameter in your transmitter can
also be used to tune the tail rotor to a desired feeling.
Setting ranges: -100 ~ 0 ~ +100% Initial value: AVCS = -20%, NORM = -20%
Sports = AVCS -60% / NORMAL -40%, 3D = AVCS -20% / NORMAL -20%>
192