Editing Marks, Lines - Furuno GP-3500 Operator's Manual

4.7

Editing Marks, Lines

You can edit the shape and color of marks and lines.
Note: Files set to "YES" on the DISPLAY DATA FROM MEMORY CARD menu
cannot be erased. (See paragraph 10.2.3.)
Also, files set to "YES" on the DISPLAY DATA FROM INTERNAL
MEMORY menu cannot be erased. (See paragraph 10.4.2.)
1. Press the [MENU] key to show the main menu.
2. Press the [5] key to show the MRKS/SHIP'S TRACKS EDITION menu.
3. Press the [1] key to show the EDIT MARKS window.
4. Rotate the [ENTER] knob to choose SELECT.
5. Press the appropriate numeric key to select the method.
CURSOR: Use the cursor to choose mark to edit.
AREA:
INSIDE:
OUTSIDE: Edit marks and lines which are not currently displayed.
6. Rotate the [ENTER] knob to select COLOR.
7. Press the appropriate numeric key to select the color to be changed.
8. Rotate the [ENTER] knob to select SHAPE.
9. Roll the trackball in left-right direction to select the shape to edit.
10. Rotate the [ENTER] knob to select ENTER.
11. Refer to page 4-7 to edit.
5-1 EDIT MARKS
ENTER
SELECT 1. CURSOR 2. AREA 3. INSIDE 4. OUTSIDE
COLOR 1. 2.
SHAPE
SET "SELECT", "COLOR" AND "SHAPE"
PLACE CURSOR ON "ENTER".
Edit marks window
Edit marks and lines in the area you set.
Edit marks and lines currently displayed.
3. 4. 5. 6. 7.
4. MARKS & LINES
8. ALL
NONE
4-9