Operating The Cursor - Furuno GP-3500 Operator's Manual

2.2

Operating the Cursor

1. Press the [CURSOR ON/OFF] key.
The cursor is turned on, and the cursor appears at the own ship's position. To
hide the cursor, press the [CURSOR ON/OFF] key again.
2. Operate the trackball.
The cursor moves in the direction the trackball is operated and the cursor
position is indicated at the top of the screen.
Note: The chart display moves in the opposite direction when it reaches an edge
of the screen.
To return the cursor to the screen center
▪ Press the [CENTER] key to return the cursor to the screen center.
Cursor position in L/L
＋ 34 43.1447'N
135 21.0758'E 350.2
Cursor
20
PLOTTER NAV INFO 1 display (appearing the cursor)
2. PLOTTER AND PILOT DISPLAY DESCRIPTION
TRKS HOLD
9.9
kt
2003. 4. 1
00:01
T
FISH
43
21
000001
22
2-7